– Can i extend my laptop to 3 screens

Looking for:

Can i extend my laptop to 3 screens

Click here to ENTER


 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

I had 3 monitors working fine in Windows 7, but just upgraded to Windows 10 and can now only get 2 of the 3 monitors to work. It gives a message saying “The display settings could not be saved. Please try a different combination of display settings. I can use any 2 of my 3 displays, so they’re all connecting and working with the graphics card. I’m using an Asus R7 x graphics card, and have installed all of the latest drivers.

Windows 10 also has all updates. I understand your concern, I suggest you to follow the link by Andre Da Costa and check if it helps. Was this reply helpful? Yes No. Sorry this didn’t help. I understand how to set up 3 monitors, and it was working fine in Windows 7.

Windows 10 shows all 3 monitors, but only allows me to use 2 at a time. From my reading through these forums and other searches, it looks like many people are having this same issue. It looks like people can get 3 or monitors working with a DisplayPort, but I haven’t seen any solutions to getting 3 standard monitors functioning in Windows Are there any other suggestions or fixes from Microsoft for this?

Make sure ” Multiple displays ” is not set to ” Disabled. Select apply once done for all displays. No luck. When selecting the grayed-out monitor, Multiple Displays defaults to “Disconnect this display”. When I try to change it to “Extend desktop to this display” or “Duplicate Desktop” and hit Apply, I still get the same error message “The display settings could not be saved.

Please try a different combination of display settings”. Again, I can get any 2 of my 3 monitors working, but Windows 10 is not allowing me to enable all 3 monitors. Please let me know what else I can try, and if anyone has gotten 3 monitors working with Windows 10 and an Asus R7 graphics card.

Sorry for the inconvenience you are facing. Have you installed any USB software installed? Is so uninstall the application and check if the 3 monitors work. You can also reduce the resolution of the 2 monitors and check if the 3rd one works. I have the same connections as your card. I had widows do an upgrade to the OS and afterwards I only had one monitor working. So I foolishly installed the Radeon Crimson I have been using multiple displays since Windows 7 64 Ultimate Edition on this computer.

That was working well prior to these Windows updates:. Any help would be appreciated! I need for all three of my monitors to work! Thanks Microsoft!!! Threats include any threat of suicide, violence, or harm to another. Any content of an adult theme or inappropriate to a community web site.

Any image, link, or discussion of nudity. Any behavior that is insulting, rude, vulgar, desecrating, or showing disrespect. Any behavior that appears to violate End user license agreements, including providing product keys or links to pirated software. Unsolicited bulk mail or bulk advertising. Any link to or advocacy of virus, spyware, malware, or phishing sites.

Any other inappropriate content or behavior as defined by the Terms of Use or Code of Conduct. Any image, link, or discussion related to child pornography, child nudity, or other child abuse or exploitation. Details required : characters remaining Cancel Submit 7 people found this reply helpful. Just to verify, has your concern been resolved?

For better assistance, we suggest you to contact your manufacturer OEM to configure the display settings of your monitor. Choose where you want to search below Search Search the Community. Search the community and support articles Windows Windows 10 Search Community member. I would appreciate any suggestions. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread.

I have the same question Report abuse. Details required :. Cancel Submit. Previous Next. Hi Chad, Thank you for posting your query in Microsoft Community. Thanks for your feedback. How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site.

In reply to SujataMoktan’s post on May 10, No, Windows 10 is not allowing me to extend my desktop to a 3rd display. In reply to chadcdc’s post on May 10, Hello Chad, I suggest you to follow the steps below and check if it helps you. Change Display Settings. Now you will see the traditional display configuration screen. In reply to SujataMoktan’s post on May 13, Thank you, Chad. In reply to chadcdc’s post on May 13, Hi Chad, Sorry for the inconvenience you are facing. Hope this helps.

I have dell t running perfectly fine with a v amd video card with 3 monitors. I tried newest amd drivers. Maria Fab Microsoft Agent. In reply to awojtowicz’s post on November 30, Hi, Just to verify, has your concern been resolved? In reply to Maria Fab’s post on December 10, This site in other languages x.

 
 

 

How to Connect One, Two, or More Monitors to Your Windows Laptop, Including USB Type-C.

 

You’ll also want to check the published specifications for your graphics hardware. Open Device Manager and then find Display adapters in the drop-down list. Expand this option to view the graphics hardware your PC uses. When you know the graphics hardware, hit your favorite search engine. Look for a support or specification page on the company’s official website that produced your PC’s graphics hardware.

You may have difficulty finding official specifications for hardware more than five years old. Beware of results from unofficial websites. Many third-party websites attempt to compile graphics hardware specifications, but most are unreliable. You can use an HDMI splitter to connect three monitors, but the results likely won’t be what you hope.

A “splitter” is a video adapter that takes a single output and splits it into multiple duplicate outputs. It can only display a single video output on numerous monitors.

In other words, all three monitors will show the same image, which isn’t much use on a PC. There’s no easy way to expand a PC’s display output limitation with a splitter or adapter.

The only option that genuinely extends a PC’s display output is an external graphics card, one that bypasses the default graphics hardware.

It’s an expensive, niche option and only works with a small selection of PCs. Another option for connecting three monitors is a daisy chain. This option is supported by DisplayPort 1. HDMI does not support daisy chains. In a daisy chain, the first monitor connects to your PC through one of the video outputs listed above. Then the first monitor connects to the second and the second to the third. A daisy chain is functional but has limitations.

The first and second monitors must have video connections that can work as an output. This configuration is uncommon, so you’ll need to carefully check the specifications of the monitors you want to use. Your PC must support this feature. Most PCs sold in the last few years will, but older models often don’t. Check the PC manufacturer’s website or the company’s website, which made your graphics card, to see if daisy chains are supported.

First, make sure your laptop graphics card supports three monitors. If you don’t see all of the monitors, scroll down to Multiple Displays and select Detect. Retailers like Best Buy and Staples have electronics recycling programs. Dell and HP also have drop-off recycling locations. There may also be recycling centers in your area that take monitors.

Whichever monitor you pick, make sure it has a good resolution and refresh rate, includes all the connectivity options you need, and is big enough to view comfortably. If you’re in an office setting, or you use your monitor for more than eight hours a day, its lifespan will likely be shorter.

When you visit this site, it may store or retrieve information on your browser, mostly in the form of cookies. Cookies collect information about your preferences and your device and are used to make the site work as you expect it to, to understand how you interact with the site, and to show advertisements that are targeted to your interests.

You can find out more and change our default settings with Cookie Settings. By Matthew S. Matthew S. Smith has been writing about consumer tech since Reviewed by Jon Fisher. Tweet Share Email. What to Know Connect the video cable for the first monitor to the PC and monitor.

Wait for an image to display, then repeat for the other monitors. Then, right-click on the Windows desktop and select Display Settings. Of course, resolution is yet another variable, and you can see our article about p vs. In my case, I already had two inch monitors, and I wanted a larger monitor as the centerpiece of my setup, so I picked up a inch monitor and placed it between my two inch displays.

If you have a VGA port on your PC or your monitor, I suggest staying away from it: VGA is an analog connector, which means your picture will be noticeably less sharp and colors will be less vivid. Set up your monitors, plug them in, and turn on your PC. A perfectly formed multi-monitor setup! Well, not so fast. Setup is easy, but there are still a couple more steps. This will take you to a screen where you can configure the options you have for multiple monitors in Windows.

Here, you can confirm that all your monitors are detected. Click Identify , which will cause a large number to appear on each of your displays, so you can determine which screen is which. A drop-down menu lets you choose whether to duplicate your desktop or extend your desktop across all the screens. Right-click your desktop and choose either the Nvidia or AMD control panel depending on your graphics card , and find the Display section, which will offer similar options as Windows.

Nvidia users will need to set up Nvidia Surround, while AMD users will need to create an Eyefinity group for their monitors. Check out our article on the pros and cons of dual displays versus a single ultrawide.

Most modern graphics cards can power several displays simultaneously. Mentioned in this article. HP Pavilion

 
 

How to Connect Multiple Display Monitors Using Your Laptop.How to create a multiple monitor setup with three, four, or more displays | PCWorld

 
 

Most desktops can only handle video connections from one graphics solution at a time. You can’t use video output from a motherboard alongside video output from a video card if you have one installed. You’ll also want to check the published specifications for your graphics hardware. Open Device Manager and then find Display adapters in the drop-down list. Expand this option to view the graphics hardware your PC uses.

When you know the graphics hardware, hit your favorite search engine. Look for a support or specification page on the company’s official website that produced your PC’s graphics hardware. You may have difficulty finding official specifications for hardware more than five years old. Beware of results from unofficial websites. Many third-party websites attempt to compile graphics hardware specifications, but most are unreliable.

You can use an HDMI splitter to connect three monitors, but the results likely won’t be what you hope. A “splitter” is a video adapter that takes a single output and splits it into multiple duplicate outputs.

It can only display a single video output on numerous monitors. In other words, all three monitors will show the same image, which isn’t much use on a PC. There’s no easy way to expand a PC’s display output limitation with a splitter or adapter.

The only option that genuinely extends a PC’s display output is an external graphics card, one that bypasses the default graphics hardware. It’s an expensive, niche option and only works with a small selection of PCs.

Not all computers support triple monitors — particularly older or cheap computers. To determine if yours does, you need to look at its video ports. Your video ports will be on the back of your computer. Count how many you have, and note what type they are. Next you have to determine if all the ports you see can be used simultaneously. There are two considerations here…. Things will get pretty laggy — particularly when you switch between monitors.

Instead, if you have a dedicated graphics card, use it rather than the integrated graphics. Your menu options may be slightly different. Some graphics cards have more ports than you can use at once. Yours might have 3 ports, but you may only be able to use 2 at the same time.

Alternatively, you could Google it; search for the brand and model of your video card, and the number of monitors you want to run. The same applies to motherboards. The solution is to use a docking station or a USB hub. That way, you will only have to plug one USB cable into your laptop to make everything work.

Your laptop would provide the third screen. This particular range seems to be popular with Microsoft Surface Pro owners which is how I know about it , but there are no doubt many alternatives. Plugable has a short YouTube video that shows an 8in Windows tablet — a Dell Venue 8 Pro, which only has a microUSB 2 port — working as a desktop PC with four monitors , an external keyboard and mouse.

This demo uses a Plugable UD hub. The increase came from changes in the DisplayLink technology used by Plugable and other suppliers, not from any changes in Windows. I have a displaylink I bought from Amazon which has been great pluggable and the Surface Book dock. Adding multi monitors is easy in Windows Shouldn’t we be able to adjust that through scaling?

I use 2 P monitors and the Book 2’s 4K screen every day at work. It sounds like you’re encountering a settings or program specific issue. Used to cause me all sorts of problems with a second monitor on a Surface Pro 4, in the end I just bought a 4K monitor so the resolution was close to the Surface, now the issues are barely noticeable. Not all applications suffer from this but if you use the ones that do, then it’s a real pain.

I have three monitors one of them is actually a TV using with DisplayLink. Windows 10 made it bit easy to use multiple screens!

I also use DispayFusion software that allows easily move the windows one to another monitor. Also it has ton of other settings especially different wallpapers on each monitor. Every now and then all the apps switch monitors but the stretched wallpaper remains correct.

The Xubuntu box on the third KVM channel stays stable. Otherwise setting the monitors up was a breeze. It used to reboot sporadically overnight until probably about two months ago.

It’s a lot more stable now. A really well designed app I use on my multi-monitor setup is DisplayFusion. I like being able to fill both monitors with one single image.

Really helps tie the monitors together quite well with tons of features. The dev is great at support and bringing fast fixes and new features. It great isn’t it, just don’t leave it running in the background or at start up, it chews a fair bit of resources. I usually just set my wallpapers and make sure its closed properly.

It doesn’t need to run always. Both monitors run at x native resolution and the SP4 runs at its native resolution of x Everything looks great. The only problem I have started cropping up a few weeks ago. Whenever the system goes to sleep, the Dells don’t wake up from mouse or keyboard action, only the SP4. I have to pull the plug out of the SP4 and plug it back in. When I do so, the Dells fire back up and re-scale themselves. Of course, all my open programs are now consolidated onto my main monitor, which is the Dell on my left, so I have to rearrange everything how I like it.

Any chance the Anniversary Update affected this? Does anyone know if it is possible in Windows 10 to have an app launch in whatever Monitor that you click on its icon on? I have 2 monitors each with a taskbar and when I click on the icon in a different taskbar, I want it to open in that monitor.

I looked for the feature. Thank you. From what I understand apps and programs always launch to the last screen they were on. I’m using two screens at the moment and everything will always open in the last place it was. An increasing number of laptops use a USB Type-C socket to complicate matters further, carrying data, video, and charging capabilities. Indeed, some devices only support USB 2. In contrast, others offer USB 3. There is another factor to your choice of cable or adapter, however.

Although you can still connect the monitor as a secondary display, you may find that the screen gets stretched or appears more blurry than it should be. Take a look at the image below to see the difference between a dual-link left and a single-link cable right. Similarly, although the HDMI 1.

Leave a Reply

Your email address will not be published. Required fields are marked *